View More Details
Boat Name
Seafarer
Specs
Flag of Registry: United States
Hull Shape: Monohull
Dimensions
LOA: 50 ft 6 in
Beam: 15 ft 5 in
LWL: 48 ft 9 in
Minimum Draft: 4 ft 7 in
Maximum Draft: 5 ft 1 in
Displacement: 60000 lbs
Bridge Clearance: 20 ft 0 in
Dry Weight: 60000 lbs
Engines
Total Power: 300 HP
Engine 1:
Engine Brand: Lehman
Year Built: 1980
Engine Model: 363TC
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Hours: 3800
Engine Power: 150 HP
Engine 2:
Engine Brand: Lehman
Year Built: 1980
Engine Model: 363TC
Engine Type: Inboard
Engine/Fuel Type: Diesel
Engine Hours: 3800
Drive Type: Direct Drive
Engine Power: 150 HP
Cruising Speed: 8 knots
Maximum Speed: 10 knots
Tanks
Fresh Water Tanks: 3 (500 Gallons)
Fuel Tanks: 2 (1000 Gallons)
Holding Tanks: 1 (70 Gallons)
Accommodations
Number of single berths: 5
Number of cabins: 3
Number of heads: 2
Seating Capacity: 8
Engines and Mechanical Systems
- Twin Ford-Lehman 150 HP turbo-diesels (Model 363TC, 6 cylinder)
Estimated hours at 3,800 each
Borg-Warner CR-2 transmissions (port trans rebuilt 2011)
New Heat Exchangers, both engines (installed 2015)
Top-end rebuild on both engines (Harbor Marine 2012) - installed new head gaskets, replaced head bolts with studs from Advanced Racing Products, cleaned heads, check for true and torqued to specs of 135 ft-lbs.
2006 work done - replaced existing House battery bank with 3 Rolls-Royce lead/acid 375 amp-hour 8D batteries - total of 1,125 amp-hours capacity. Replaced Start battery with 1 Rolls-Royce 8D 375 amp-hour battery. Replaced all existing DC wiring connecting batteries/alternators/starters/etc. with new 4/0 cables. Also installed new remote Blue Sea solenoids for battery control from the helm. Installed new Balmar MC-612 digital regulators along with Balmar Centerfielder. Installed new turbocharger blankets, fabricated by Advanced Thermal Products of Santa Ana, CA.
2002 work done - injectors serviced, new exhaust elbows, raw water pumps rebuilt, heat exchangers reconditioned, new raw water intake hoses and coolant circulation system hoses/clamps. New coolant water pumps installed, new head gaskets and head bolts installed, valves ground and valve guides replaced. ESI fuel polishing system installed.
15 KW Onan Generator - enclosed in aft section of engine room. Work done on this and related systems includes:
1999/2000 - installed new Heart Freedom 25 (2500 watt inverter) plus new Interphase Twinscope. Installed new Salzer Rotary switch in panel for Shore/Generator/Inverter switching. Installed Balmar large-frame alternator on starboard engine. Electrical work done by Seanet Electronics with mechanical and boatyard work done by Driscoll in San Diego. This boat has double 50-amp shore power inputs (100 amps total) on both starboard and port sides.
Installed new stainless steel generator exhaust elbow, fabricated by National Marine Exhaust in Marysville, WA (2012 by Harbor Marine)
Naiad Stabilizers - 1999/2000 work included removing these for full inspection/service, including replacing all seals. Done in San Diego by Driscoll.
- Driveshafts and related below-waterline systems
Electroguard Control unit (corrosion control) replaced, new shaft wipers installed on both port and starboard shafts (San Diego 1999). Includes galvanic isolator.
Pulled and reconditioned both shafts, installed dripless shaft seals, replaced all cutlass bearings, R&R props, aligned shafts with new DriveSavers (2011 by Harbor Marine in Everett, WA)
- Bow Thruster - 24 V-DC system.
Navigation Systems
Furuno GP-1810 GPS/Plotter
Furuno FCV-582L Color LCD Video Sounder
Furuno 1942 Mark-2 64-mile CRT Radar w/4-foot open array antenna
Raytheon Ray 90 VHF (lower helm)
Standard Horizon Eclipse VHF (flybridge)
Raytheon Ray 420 Loudhailer
Autonav A-1500 autopilot
Interphase Twinscope Sonar
Tower computer running Captain Navigation software w/flat screen at lower helm
Replaced antennas
(Other new installs done at this time noted under Engine and Mechanical Systems)
- Additional equipment includes:
Xantrex Battery Monitor
ACR EPIRB NEW Samlex 3000 Inverter Charger
Additional Equipment and Systems
Galley and Heads
Stainless sink - H/C pressure water on single lever faucet control with pull-out sprayer
20-gal stainless hot water tank, runs via 120 V-AC as well as from hot water heat exchanger on port engine
3-burner propane stove/oven
Large, well-insulated refrigerator and freezer
Standalone refrigerator (110V) and separate ice maker in main salon
Microwave (110V)
Cold-Plate refrigeration compressor replaced in 2000 with new 12-Volt DC unit by Fleming Marine in San Diego, powering 2 separate freezers and 1 galley refrigerator (all very well insulated)
SeaLand Vacu-flush freshwater toilets in forward and aft heads, installed by A-Z Marine in San Diego (1999/2000), with SeaLand macerator pump on 70-gallon holding tank.
Full bathtub/shower in aft head and large shower stall in main head.
- Heat and Air Conditioning Systems
Espar forced-air diesel heat, ducted throughout the boat
3 Marine-Air zoned reverse-cycle heat pumps for either heat or air conditioning
- Anchoring
Galley-Maid vertical capstan anchor windlass (24 V-DC)
Main anchor is a 30-kg Bruce with 250' chain and additional rode
12-Volt wash down system on foredeck
- Dinghy and Outboard
2019 West Marine RIB with 4-stroke Honda 10 hp outboard
12-Volt Crane/Winch to store/launch dinghy on top of aft cabin
6-person Switlik emergency life raft
Swimstep with good access from aft deck
