About this Yacht
Roche Harbor, WA
53 ft 0 in
Engine / Fuel Type:
View More Details
LOA: 53 ft 0 in
Beam: 28 ft 9 in
Maximum Draft: 4 ft 8 in
Displacement: 30000 lbs Half Load
Fresh Water Tanks: Plastic (210 Gallons)
Fuel Tanks: Aluminum (264 Gallons)
Holding Tanks: Plastic (64 Gallons)
Number of heads: 2
The accommodations are accessed through the cockpit where a 62” wide by 68” tall sliding glass door sits atop a 6” tall threshold. An 8” deep well with drains located aft of the door prevents rain water ingress. Stepping through the door one steps down onto an 8” high by 24” wide step into the spacious and bright salon/galley area. The hinged-top step has a storage bin below.
The warm and elegant cabinetry, Wilsonart counters, wood cabin sole, leather upholstery, quality fittings and designer details immediately reveal that Gambit is no ordinary production catamaran. The interior design, materials, fabrication, and condition are superlative. Furniture is crafted from satin-varnished Cherry with foam core construction engineered to save weight. Cabinet and cabin doors are paneled with routed louvers in the tops. Counters are white Wilsonart with red/white/blue flecks and surrounded by curved 1” high strip laminate jig-bent and glued fiddles; no sharp corners anywhere! Cabinet handles, hinges, latches, and light fixtures are chrome finish. Hinges are euro-style with ball catches on cabinet doors. The cabin sole is teak and holly over balsa core; scratch free and satin finished. Cabin soles in the hulls and staterooms are covered with blue carpet over fiberglassed balsa core. Overheads and hull side panels are white vinyl over foam padding and secured in place with Velcro; easily removed for accessing hardware and wiring. Well-placed, wall switched, overhead spot lights are recessed and reading lights are thoughtfully placed throughout. Cabin fans also located throughout. All lights are LED. 110V and 12V power outlets are provided in each cabin and space. Red courtesy lights are located around the cabin sole for night navigation.
Gambit was conceived for a family to safely and comfortably circumnavigate the globe. Charter versions built using the same hull/deck mold have had five staterooms and five heads. Gambit has an owner’s layout with the entire starboard hull dedicated to the owner. The bridgedeck has a massive, wrap around galley to port. A raised dinette is to starboard and aft. The navigation station is forward to starboard. Headroom measures 6’ 6” aft and 6’ forward as the aerodynamic cabintop slopes forward. The starboard owner’s hull has a head with separate stall shower aft. An office/storage space is in the at the companionway base. The stateroom is forward through a privacy door. The port stateroom has two equally proportioned guest staterooms with a central head and separate stall shower in the forward passageway.
Sitting down comfortably at a large dining table, looking forward with excellent views is so seldom found on any cruising sailboat. Yet it is so nice. Gambit’s raised dinette simply nails this feature. Raising the dinette onto an 8-1/2” high platform is the key. Tan Ultraleather cushions are sculpted and contoured for maximum comfort. These cushions lift up to access storage bins beneath the seats which measure 7’ along the aft bulkhead with a 5’-6” long starboard “L”. A 4’ wide bench seat with bin storage will seat two forward. A total of eight could comfortably dine at this large table. The varnished cherry table measures 5’-7” long by 3’-8” wide and has an artful inlaid chess board (hence the name Gambit) and low fiddle. A clear custom tempered glass top has kept this table in excellent condition. Two overhead spot lights, two reading lights on the aft bulkhead, and two cabin fans service this table.
Forward of the raised dinette is a wraparound navigation station with excellent forward and starboard side views; sufficient for watch standing in low traffic areas. To port is a 22” by 41” chart table with 3” deep top-opening drawer. Two large drawers and a very long front opening bin for storing rolled up charts is below this chart table. A red Ultraleather-covered swivel chair with arm rests adjusts up/down on its pedestal base. This chair sits atop a 5” tall platform to maximize views forward. The navigation and communications electronics are flush mounted in a 12” high padded black vinyl console. Breaker switches for the nav/com electronics and nav lights are also located on this console. A 12” wide by 41” long worktop with shelf below is ideal for laptop or keyboard use. Outboard, to starboard is a raised 18” x 39” counter topping three open bookshelves. Three 12V outlets, a 110V duplex outlet, fan, reading light, and flex-arm red light complete this work station.
An entertainment cabinet is on centerline/forward between the galley and nav station. Stereo, TV and video players are housed in this cabinet and visible from the dinette or bar stools. There is substantial storage and a safe here as well.
The galley is to port and occupies a substantial piece of bridgedeck real estate. The vast countertop area, cabinet and drawer volume, communication to the salon and cockpit, and outside views will satisfy any chef. The galley wraps around and a 6” step just forward of the stove maintains headroom (6’-6” aft and 6’ 2” at sinks forward) as the cabintop slopes forward. A front-opening fridge and freezer are located aft along the aft bulkhead. Two additional storage cabinets are located in this aft console along with a large open counter. One of these lockers is for spirits and stemware. A trove of cabinets, lockers, and drawers including: narrow drawers for trays and cutting boards, sliding door cabinets for dishes, front and top opening trash bin, and cabinet below the stove for pots and pans will swallow all desired galleyware, cookware, and consumables for a long voyage. The large, double sink is forward and a dish drying basin is outboard to port with a white cutting board cover. A raised 16” wide by 68” long raised countertop between the galley and salon hides galley work from the salon and serves as a breakfast counter. Three stainless-steel bar stools with round red Ultraleather seats serve this counter/bar.
- 4.5 Cubic foot front-opening freezer with digital thermostat
- 6.6 Cubic foot front-opening fridge with digital thermostat
- Force Ten three burner propane stove/oven with broiler
- Trident propane gas control switch/alarm
- Salt and freshwater foot pumps at sink
- 11-1/2” by 12” by 8” double stainless-steel sinks
- Delta single lever faucet
- Panasonic stainless-steel Genius Prestige NN-CD989S convection/microwave oven in custom cabinet
Descending six steps down into the starboard is the owner’s hull. An office space is inboard just forward of the 45 degree-slopped stairs/ladder. A 20” by 40” desk with 3” deep, top-opening drawer has a blue Ultraleather padded, swing-out 12” round seat, reading light, and 110V outlet. This semi-private space is a great place to catch up on business affairs and correspondence. Two bookshelves and three cabinets are above the desk. Aft of the companionway is the main 12V and 110v breaker panel in a cabinet above a lower cabinet with slide-out bins sized for standard files. Outboard along the hull side, are two 30” wide hanging lockers flanking a lower 38” wide by 20” deep cabinet with four shelves and two opening ports with screens and privacy covers.
The master stateroom is forward through a locking privacy door. A dressing mirror is mounted on the door inside. The athwartship-oriented queen-sized berth has 9” shelves along the forward and aft sides and a blue Ultraleather-padded headboard inboard. A large opening overhead hatch and forward opening port bring in light and fresh air. A bookshelf is up high on the aft bulkhead and two reading lights are outboard of the headboard. The mattress is 6” thick and has a 3” thick foam topper. Below the berth is a 3’ long by 16” wide seat with padded cushion allowing one to sit at a 32” long by 15” wide desk mounted along the outboard hull side. A 3” deep drawer, mirror, reading light, and 110V outlet serve this desk. Aft a cabinet with four shelves is outboard of the door. Forward a large door conceals two slide-out drawers and access to the bow storage areas (closed with a zippered mesh panel). A cabin fan and two overhead spot lights complete this stateroom along with two opening outboard hull ports with screens and privacy covers.
The master head/shower is aft in the port hull and entered through a locking privacy door. The head compartments are fabricated from easy to clean white-gel coat finished fiberglass for low maintenance Countertops are blue Wilsonart. Sinks are integral white solid laminate. The cabin soles are removable teak and holy over balsa-cored fiberglass panels. Outboard is an elegantly curved vanity with 16” by 10” by 8” deep oval sink. A Skandvik faucet and soap dispenser are fitted at the sink. A medicine cabinet with mirrored door and florescent bar light are forward above the sink. The Vacuflush head is inboard and aft with a high up fixed inboard viewing port above it. Cup holder, toilet paper holder, towel ring, and opening hull side port with screen and privacy cover complete this space. Aft is a large stall shower with hinged acrylic door. A mixer valve, adjustable shower bar, spray nozzle and hose are mounted on the inboard hull side. An Aquamaid shampoo/soap/conditioner dispenser is mounted forward. A towel bar, drain pump, removable fiberglass grating, and opening port up high (nice ventilation with screen) complete this space. A removable panel in the aft bulkhead provides secondary access (primary access through deck hatch) to the starboard engine space/workshop.
Six easy steps down from the galley into the port guest hull one finds a laundry area. A front-loading washer/dryer is aft and inboard with a storage locker above it and a locker with the refrigeration compressors below the washer. Outboard along the hull side is a tall 27” wide hanging locker forward of a linen locker with three shelves. Blue carpet covers the balsa cored sole. An opening hull side port with screen and privacy cover as well as an overhead light complete this space and forward passageway.
- Quietline 110V washer/dryer
Moving forward in the passageway, a shared guest head/shower is inboard through a locking privacy door. This efficient space has a vacuflush head aft, vanity with sink and medicine cabinet inboard, and stall shower forward. The stall shower has a hinged acrylic door, adjustable height spray nozzle bar, mixer valve, soap dish, and towel ring. Additional towel rings, opening hull side port, and overhead hatch complete this clean/white space.
A forward guest stateroom is entered through a locking privacy door at the forward end of the passageway. The queen-size berth is inboard and oriented fore and aft. A blue padded Ultraleather headboard is aft along the bulkhead. An 11” wide “L-shaped” bookshelf wraps around the foot of this berth up high; well-used by the voracious-reader occupant. Aft is a locker with four shelves. A 36” long by 15” wide bench seat with blue Ultrasuade cushion allows one to sit at the 32” long by 12” wide hull side work desk with 3” deep top-opening drawer. Or a swing-out 12” stool can be used to close-sit at this desk, leaving no excuse for incomplete homework assignments. Forward along the hull sides are four open bookshelves. All the way forward, behind a door, are two pull-out drawers, a hanging locker and finally, access to the bow storage area behind a zippered mesh divider. Reading lights, 110V outlets, cabin fan, overhead hatches, and hull side opening port with screens and privacy covers complete this space.
The aft guest stateroom is entered through a locking privacy door aft of the laundry space. A dressing mirror is mounted on the door, inside. The queen-sized berth is oriented athwartship and a red Ultraleather padded head board is inboard. A 5’ long by 6” wide bookshelf is mounted above the headboard. Forward and inboard a 32” long by 17” deep writing desk with 3” top opening drawer provides a wonderful ensuite office space for homework or business. A 12” round stool with blue Ultraleather cushion swings out from beneath the desk. A bookshelf and double door locker with shelve is above the desk. A 28” long by 18” wide bench seat with blue cushion and bin storage below is outboard along the hull side just forward of the berth. An access hatch below the berth provides secondary access (primary through hatch and ladder in the aft deck) to the port engine. Forward and outboard is a cabinet with four shelves. A tall hanging locker is forward and inboard of the cabin door. Reading lights, cabin fan, 110V outlet, opening hull side port with screen and privacy cover, plus an overhead hatch complete this cabin.
ELECTRONICS & NAVIGATION:
- Raymarine Quantum radar mounted on mast
- Shakespeare omnidirectional FM/TV antenna on mast over radar
- Masthead tricolor and anchor light
- Foredeck light
- Primary Whitlock rotary ¾” stainless chain drive autopilot with secondary Raymarine Type 2 hydraulic autopilot ram
- Steaming light
- Side and stern navigation lights
- Samsung 24” flat screen TV
- JVC stereo model KS-FX240
- JVC CD changer model CDX-ER
- LG DVD player model 5183 (all regions)
- VHS Player (all regions)
DECK & HULL:
Gambit has ivory colored gel coat hull with black antifouling bottom paint below a 2” tall red boot stripe. A rub rail is fastened to the hull sides 16” below the deck edge. A white UHMW plastic strip is sandwiched in black rubber and well positioned to protect the hull sides from piling or pier. The hull side opening ports are in line with and protected by this rub rail. A moderate tumble home between the hull sides and deck geometrically strengthen this critical junction. The wave piercing bows are slightly flared and overhanging. The scoop sterns molded into the raked transoms ease boarding from tender, low dock, or water. Four easy steps lead from swim platform to the side decks.
The deck is finished in white gel-coat with molded-in low profile diamond nonskid areas; cool in the tropics and easy to clean/maintain. Raised hatch foundations, recessed/guttered locker lids, molded in steps, and radiused/recessed window mullions show a high level of design and tooling detail. A Goiot extruded aluminum toe rail with oval holes is fastened with through bolts to the deck edge. So functional for tying fenders, rigging awnings and so many other applications. The massive chain plates include eye nuts which handle the loads from stropping outboard sheet leads. 30” Tall stainless-steel stanchions mounted in Goiot toe rail bases support double uncoated wire lifelines. Stainless-steel gates fold down as ladders for boarding from low docks or tender. These gates are located about ¾ of the way aft on each side. Bow pulpits with white plastic “dolphin watching seats” are forward on each bow, just aft and clear of folding “D-rings” used for tacking down wind sails. Stern pushpits terminate the lifelines on each side atop the stern steps.
When not in use, the tender stores securely on chocks atop the 32” wide poop deck aft of the cockpit. Primary cockpit access is through an opening in the aft cockpit coaming. An array top and aft-opening hatches gain access to a massive storage locker in this 16” tall deck. The owner reports storing 12’ long windsurfer, SUP’s, dive gear, and other long items in this space; a much more secure alternative to lashing on deck. The tender is launched and retrieved using an anodized aluminum boom extension crane, and a topping lift led to an electric winch. Sea kayak storage is above the dinghy from hanging stainless-steel mounts fixed to the targa arch. Two additional storage lockers are in the aft cockpit coaming. A custom stainless steel line reel with 600’ of floating line (and more than twice that capacity) is in the starboard locker, ideally placed for shore tying.
Supplementing the cockpit and stern locker storage are voluminous deck-accessible bow lockers in the bridgedeck forward of the mast. These include: two 42” deep lockers with 21” x 16” hatches on centerline forward. The owner reports storing a whole, butchered lamb in one of these in New Zealand enroute to a huge cruiser’s BBQ. Lifted in/out with the spinnaker halyard this overboard draining locker worked perfectly. Two 42” deep lockers are further outboard with 16” x 29” hatches. The port locker houses two large propane tanks. The code zero sail with attached hardware plus sheets and multicolored spinnaker in snuffer are stored in the starboard locker. Two massive lockers with 21” x 36” hatches are on centerline and store the anchor rodes in mangers. The large plastic water tanks are outboard and aft. These tanks will fit out the hatch if one ever needed to replace them. The anchor windlass is mounted on centerline, below a recessed hatch just forward of the mast.
Trampolines and catwalk fill the area between the bows forward of the bridgdeck. The white plastic-coated, ribbon mesh trampoline is taught and comfortable to walk, sit, or lay on. These trampolines were recently restitched with Gore-tex thread(for UV protection) and measure 8.5’ long by 8’ wide each. A centerline catwalk comprised of two anodized aluminum mast sections spanned by fiberglass slats provides fore and aft support to the forward cross beam. A hinged, top opening section of this catwalk allows access to the anchors and rollers.
The raised cabintop is wedge-shaped forward to improve aerodynamics. The sides are flared aft to provide ample headroom in the hull companionways. Fixed side and front window and top opening hatches afford amazing views from the salon/nav/galley space. Two molded steps on either side of the mast make stepping up onto the cabin easy and molded-in nonskid provides secure footing. Stainless-steel handrails are fitted outboard on the cabintop sides.
Gambit has a large, comfortable and fully-protected cockpit; an obvious choice when selecting a gathering spot during cruiser pot lucks. Primary access is from the aft deck through a 30” wide opening in the 32” tall coaming. A rigid bimini is fastened to a stainless-steel frame spanning the cabintop and targa arch. Clear acrylic sliders are fitted over the helm and port side access steps. Clear, zippered panels completely enclose the cockpit. The 18” wide cockpit seats with 15” tall backs are well designed for comfort. To starboard is an “L”-shaped seat measuring 52” by 52”. To port the “L” shaped dinette has seats measuring 82” by 50”. The dual pedestal-mounted table measures 53” by 41”. This beautiful varnished cherry table features a dolphin inlay of contrasting hardwoods. A raised, double helm chair sits aft of the bulkhead mounted helm. The seatback flips forward or aft for driving or socializing. Cockpit storage is found below the seats and in a 16” deep locker below the cabin sole accessed through two 37” by 21” hatches.
- 44” Long stainless-steel handrails inboard at scoop sterns
- Stainless steel fold over swim ladder at starboard transom
- (8) 13” Goiot aluminum mooring cleats located outboard of toe rail on hull side tumble home: (2) on sterns inboard, (2) at bows, (2) midships, (2) aft
- (2) 12” Aluminum mooring cleats welded atop forward cross beam
- Maxwell 2200HC 12V horizonal anchor windlass; with dual/independent chain wildcats and line gypsies
- Local windlass foot buttons and long wired handheld control (reaches helm and bows)
- 40kg Delta anchor with 70 meters of 10 mm high test chain and 100 meters of plaited line rode
- Fortress FX-85 anchor with 30 meters of 10 mm high test chain and 100 meters of plait line rode
- Dual anchor rollers just forward of bridgedeck for handling and self-launching anchors
- 1” Nylon three strand anchor bridle with notched stainless steel plate chain hook rigged to padeyes low on inboard bows
- Lifesling in white plastic case mounted on port stern rail
- Horseshoe ring mounted on starboard stern rail attachable to protected man overboard pole
- Prestige 430 Greyhound RIB inflatable with fiberglass hull and double floor with fold-down transom wheels with complete dingy cover
- Yamaha Model F25AMH 25hp four stroke outboard engine with Doel plane assist fin
- 600’ of ½” three-strand polypropylene floating line on stern locker-stored reel
- Molded composite targa arch aft of cockpit with mainsheet traveler, stainless steel solar panel mount/kayak rack, and stainless rung side access steps
- Stainless steel mounting pole on starboard quarter for wind generator
- 2” Thick dark blue yacht acrylic cockpit cushions with white piping
- Yacht vinyl padded protective cover for cockpit table
- Raided double helm seat with 15” x 38”, 4” thick cushioned seat, flip/flop backrest, and stainless-steel footrest
- (4) Wichard folding “D” rings on side decks for jacklines
- (10) 17” x 7” Opening hull side ports
- (4) Goiot 18” x 18” hatches over forward staterooms, aft stateroom, and stb engine room/workshop
- (4) Goiot 14” x 7” hatches in side decks
- (4) Goiot 18” x 18” hatches in salon/galley cabintop
- (2) Goiot 24” x 24” hatches aft to access engine rooms from side decks
- Opening side port in starboard cockpit coaming over shower
- Fixed cabin side ports with tinted 12mm thick Plexiglass
- Fixed cabin front ports with clear 12mm Makrolon and stainless steel exterior trim rings
- Soft canvas “block out” covers for forward fixed windows
- Phifertex plastic-coated mesh UV covers for some side fixed windows
- Stamoid and Makrolon removable/zippered panels fully enclosing cockpit; fabricated by San Juan Canvas
- Lightweight passerelle “plank”/fenderboard
SAILS & RIGGING:
Gambit is designed, built and outfitted for speedy and safe ocean passages. Her relatively narrow hulls, light weight, powerful custom Simonis sailplan, and low/aerodynamic profile allow her to make excellent speed in light or strong winds. Her spars and forward crossbeam are by Sparcraft. Most deck hardware is oversized by Antal in Italy. Winches are stainless-steel Anderson. Two of the winches are electric and located at the cockpit allowing most sail handling and trimming from the cockpit. The fractional rig uses diamond shrouds on the top spreaders to support the large mainsail. The genoa sheets to tracks well inboard on the cabintop. A removable “A” frame hinge mounts on the forward cross beam, extending the code zero or spinnaker tack. An inner forestay attached to a chainplate on the bridgedeck provides extra mast support and soft shackle luff attachment for a storm jib.
- Sparcraft triple spreader aluminum mast painted with white LPU
- (2) fixed steps down low and (2) folding steps at masthead
- Sparcraft white painted aluminum boom with side gull wing racks for lazy bag and access to full length of boom and targa wing
- Solid, fixed boom vang compression support tubes
- Blue yacht acrylic mainsail lazy bag with mesh bottom for rainwater drainage
- Spectra lazy jacks topped slightly outboard on middle spreaders
- Harken luff track and heavy duty Battcar ball bearing mainsail luff slide system
- Dyform standing rigging with swaged upper terminals, Norseman lower terminals, and open Gibb chromed bronze turnbuckles and toggles
- Forespar lighting dissipator at masthead
- Masthead Windex wind direction indicator
- VHF antenna mounted atop lower spreader
- 2:1 Mainsail halyard
- Topping lift/dinghy hoist
- Masthead spinnaker halyard
- Genoa Halyard with Antal adjustable track stop system
- Storm jib halyard
- (2) Signal halyards on lower spreader
- Sparcraft anodized aluminum forward crossbeam with spreader-extrusion “A” frame gull striker and solid rod stays
- Aluminum, “A” frame hinged bow sprit with 4:1 downhaul/tack line and wire rope stays to padeyes down low on inboard bows
- Profurl 52 genoa furler on headstay with control line led aft to cockpit
- (2) Wichard folding “D” rings on bows for spinnaker tack
- (2) Wichard folding “D” rings on stern quarters for spinnaker sheet blocks
- (2) Antal 120mm x 18mm spinnaker sheet turning blocks
- (2) Large Nico fico rubber cheek snatch bocks
- 770 sf Heavy duty Maxx hi tech fiber laminate genoa built in New Zealand with foam in luff for reefing and blue yacht acrylic UV cover
- 1130 sf Spectra laminate full battened mainsail with three reef points
- Quantum Dacron storm jib with soft shackles on luff
- 1400 Dacron square foot Code Zero reacher with Harken MKII continuous loop furler
- 2000 sf Symmetric 2.3 oz nylon spinnaker with control sock
- Anderson 52 ST on mast for halyards
- (3) Lewmar rope clutches on mast
- (3) Reef clew lines led aft to stoppers and electric winches in cockpit
- (3) Reef tack straps at mast and downhaul line on third reef
- Antal 1.25” wide 70” long genoa tracks atop cabin with four pin-adjustable cars
- Antal 3:1 mainsheet traveller atop targa arch with control lines led to stoppers and winches in cockpit
- 3:1 Antal mainsheet blocks
- Winch handle holder on mast
- (2) Anderson 58 ST electric winches at aft end of cabin/forward end of cockpit
- (2) Anderson 46 ST winches on cockpit coaming for spinnaker/reacher sheets and targa wing traveler control
MECHANICAL & PLUMBING SYSTEMS:
The engine spaces and access to systems aboard Gambit are best described as “excellent.” The two engine rooms are large, well lit, and clean. Access is via 24” x 24” Goiot deck hatches in the sterns where aluminum ladders are fix mounted. The starboard engine room has the majority of auxiliary systems, full standing headroom, and a workshop. Aft at the ladder base is 22” long by 18” wide wood workbench with a machinist vice. A storage shelf is above this bench. Inboard of the engine are spare parts/consumables storage lockers. Tools are surface mounted around these lockers. The watermaker is forward and outboard with all components visible and easy to operate and service. A fuel filter/polishing station is just aft of the watermaker. Batteries and electrical system components are inboard. Secondary access to this machinery space is through a removable panel in the shower stall. Secondary access to the port engine space is beneath the aft stateroom bunk providing standup/walkaround access for maintenance beyond simple fluid checks.
- Yanmar 4JH5E 55 hp engine and saildrive with 695 engine hours (new 2013)– port side
- Yanmar 4JH3E 55 hp engine with 2335 hours and SD40 saildrive; cone clutch rebuilt in 2015
- Three blade Flex O Fold propellers on both engines
- Twin Morse single lever engine throttle controls at helm station
- 30” diameter leather-covered steering wheel
- Whitlock cable steering; rudders mechanically synchronized with anodized tie bar; incredibly light and responsive
- Vectran line rudder angle limiting stops
- Emergency tiller
- Racor 500FG primary fuel filter/water separators with vacuum gauges
- Fuel polishing/transfer system with Jabsco mini Puppy 12V pump, AlgaeX unit, and Racor 500FG filter
- Vetus sea water strainers
- (2) Yanmar engine panels with tach, oil pressure and water temp gages (new 2013)
- Plastimo hot/cold freshwater stern shower
- 30 lb Aluminum propane tank
- 30 lb Painted steel propane tank
- Propane solenoid valve, regulator and pressure gage
- Seafrost BD35 12V air-cooled and engine driven/seawater-cooled refrigeration system and freezer system
- Spectra 200C 8 gph 12V watermaker
- Fresh water foot pump with charcoal filter for drinking water
- Salt water foot pump in galley
John Guest PVC plumbing with hot water recirculation valves
- Isotemp 40 liter 750 watt hot water heater
- (2) Webasto Airtop AT5000D forced air diesel cabin heaters ducted to all cabins
- Engine room 12V blower
- (2) Rule 3527 GPH bilge pumps in engine rooms
- Manual and electric bilge pumps in all compartments
- (2) 12V Vacuflush marine heads
- (2) Plastic holding tanks with Tankwatch level indicators, overboard discharge and deck pump out
- 1100 watts of solar panels on cockpit rigid bimini and targa arch extension
- Kiss wind generator on port quarter pole over engine room (not over a stateroom)
- Xantrex Link 1000 inverter/charger remote control and battery monitor – at nav station
- Heart Pathmaker battery combiner
- Lifeline group 24T start battery stb engine (new 2015)
- Full River DC-85 start battery port engine (new 2013)
- (4) Lifeline 8D AGM house batteries (New 2017), totaling 1020 amp hours
- Freedom Marine 30 3000 watt inverter/100 amp 12V battery charger
- 3.5 KVA Torroidal shorepower transformer/isolator
- 60 amp Outback MPPT solar panel regulator
- (2) NC25 Flexcharge solar planel regulators
- 1100 watts of solar panels mounted on bimini and extension rack aft of arch
- 180 amp 12V alternator on stb engine with Ample Power Next Step regulator
- 55 amp 12V alternator on stb engine
- 100 amp 12V alternator on port engine
- 165 amp Balmar alternator on port engine with Balmar ARS-5 regulator and Balmar mounting hardware